Install Fuser Hp Printer
Install Fuser Hp Printer. Align the fuser with the arrows on the product. If the optional duplex accessory is not installed, skip this step and go to step 2:
If the optional duplex accessory is not installed, skip this step and go to step 2: Push the fuser completely into the printer. Open the bin and squeeze the right hinge pin (on your left if you are behind the printer) out of its mounting hole.
Grasp The Blue Handles On The New Fuser And.
Remove the duplex accessory cover. Then rotate the bin away from the printer to release the other. Push the fuser completely into the printer.
Follow The Instructions That Came With The New Fuser Kit To Recycle The Used Fuser.
Push the fuser handles back to close. An even better option is to check to. Slightly lift up on the duplex.
Download And Save The Current.
Open the bin and squeeze the right hinge pin (on your left if you are behind the printer) out of its mounting hole. Grab the entire width of the paper. Align the fuser with the arrows on the product.
The Process Of Removing The Paper Jammed At The Fuser Should Be Slow And Deliberate.
If the optional duplex accessory is not installed, skip this step and go to step 2:
